Technistone Gobi Black

Price Estimator

Step 1 - Product Selected
< Change product

Step 2 - Configure your Worktop
Use Layouts or Add Your Sizes
Notes:
Step 3 - Add Details & Other Information
  • Add Cutouts

    These are the common drainer grooves found with undermounted sinks

    Other Info

    Please give us any information that can help us when we do your quote

    Schedule

    *Schedule

    When are you hoping to have your worktop installed? Please provide an estimated timeframe to help us better understand and meet your scheduling needs.



     

Estimates are subject to change based on the Seller’s discretion, for example but not limited to, sheet optimisation, joint positioning, warranties, other elements that may affect the quantities of materials required.  Not all elements of your design can be captured by the estimator, such as waterfall legs, window cills, special edge details, which require further manufacturing time and thus further cost. Worktops.net will produce a full and up to date quotation from the estimate completed by the Buyer, The Buyer must include a full delivery and installation address. Please add your address and up to date contact details on the checkout page.

PLEASE NOTE: 12mm thickness is not covered under warranty. Minimum thickness of 20mm to comply.

Description

Gobi Black Technistone

A deep, matt black with reflective particles. Gobi Black by Technistone is non-porous, highly resistant to scratches, stains and bacteria. Suitable for any worktop project.

Colour Band:
 3
Family: Essential
Finish: Polished / Brushed / Honed / Matt
Sheet Thicknesses Available: 12mm /20mm / 30mm
Sensitive Colour: No

TechniStone® is a premium, compact, durable and non-porous product consisting mainly of carefully selected natural materials (quartz and granite). For the impressive appearance the product is completed by coloured pigments and crushed mirrors; blended and bound with a high performance polyester resin and processed into perfectly straight, flat and resistant slabs with different thicknesses and surface finishing.

Joints
All joints are finished with a small ariss to the top edge and are carefully sealed with silicone to allow for expansion and to prevent water seeping through or bacteria growing in cavities.

Tolerance in quartz worktops is ±2mm

Heavily Veined / Particulated Colours
These colours are highly unlikely to have contineous flow of the pattern when 2 sheets or 2 pieces of the same sheet are seamed together. The change of pattern will show up on the seam area

Thermal Expansion
Due to thermal expansion Quartz can expand up to 1mm per meter

Overhangs & Support
Any overhang extending more than 300mm should be supported and carcasses should be 600mm spacing
Due to the weight of quartz worktops, it is essential that your units are level and securely fixed.

Cutouts for Hobs, Sinks, etc
Sink cutouts are placed a minimum 50mm from the worktop front edge
A minimum of 120mm is required between two hob cut outs.
A minimum of 100mm is required between hob and sink cut outs.
A minimum of 70mm is required between two sink cut outs.
If a waste disposal unit is fitted to an undermounted sink after installation, additional support will be required, otherwise your warranty may be invalidated.

Stainless Steel Sinks
Carefully select your preferred method of undermounting stainless steel sinks to ensure sufficient support.
When the plumbing is done to the sink, it is important that the plumber reseals it with silicone, otherwise water may seep through the gap and your warranty may be invalidated

Upstands
Upstands less than 100mm high are extremely fragile and are not recommended.
Upstands are not normally cut from the same slab as the worksurfaces and therefore an exact colour match is not possible.
Because quartz upstands are straight and rigid, gaps will be visible if there are any imperfections or variations on the wall profile. To cover these gaps between the wall and the upstands, it is recommended that plastering or tiling be completed after the worktop installation.

Care and Maintenance
Worktops.net offer a Care and Maintenance Kit which has been developed to offer the customer everything they need to keep their worktops looking good for years to come

Scratches
Quartz worktops are not scratch proof, the use of chopping boards is recommended. Dark, heavily pigmented colours will show scratches, wear and tear more easily.

Hygienic
Quartz worktops are naturally hygienic as it is non-porous and do not harbour germs

Tough

Quartz is one of the hardest minerals in the world. This makes our products very durable, with a high level of resistance to external aggressions

Easy to Clean

With a non-porous surface that prevents dirt and stains from penetrating the material.

Non-Porous

Bacteria and mould have nowhere to take root. When it looks clean, it really is clean

Durable

Proven to be remarkably durable, a versatile material that is easy to live with in both domestic and commercial environments

Additional information

Material Type

Quartz

Brand

Technistone

Price Band

Band 3

Jumbo Slabs Available

No

Thickness

20mm, 30mm

Colour

,

Style

Fine Grain

Surface Finish

Polished

Edge Details